Raspberry Pi Setup

Documentation In Progress

This page is under construction. Check back soon!

Recommended Models

Model	RAM	Status
Pi 4B	2GB+	Recommended
Pi 3B+	1GB	Supported
Pi Zero 2 W	512MB	Supported (limited)

OS Requirements

• Raspberry Pi OS (Bullseye or Bookworm)
• 32-bit or 64-bit supported

Initial Setup

1. Flash Raspberry Pi OS to SD card
2. Enable SSH
3. Boot and connect to network
4. Run TARPN installer:

curl -sSL https://raw.githubusercontent.com/dpaschal/tarpn-node/main/scripts/install.sh | bash

Resources

• Raspberry Pi Imager
• TARPN Installation Guide